SANEI ELECTRIC SK1-21A, Technical Manual

Page: 32 / 56

３２
SK1-21A/31A
4- 4
．
Setting the memory switch
Follow the flow chart to change the parameter. As setting parameter is printed, choose the right
parameter by manipulating the FEED and SELECT buttons.
After completing the parameters set up, data are stored and the printer goes to standby mode.
ENTER SETTING ?
ENTER COMMON
SETTING ?
ENTER INTERFACE
SETTING ?
Change the setting of INTERFACE
・
BAUD RATE
・ BIT LENGTH
:
:
MODE END
(Finish)
NO
NO
Change the setting of COMMON
ＰＡＰＥＲ FEED
Function setting mode
YES
YES
※ Prints the below after
completing the setting:
SETTING COMPLETE
SETTING MODE END.
※
The setting mode is
finished and the printer goes
to standby mode.
Modified data are stored
automatically.
YES
YES
■ YES : FEED button ------ Decide
■
NO : SELECT button ------ Move to next