SANEI ELECTRIC SK1-21A, Technical Manual

Page: 16 / 56

１６
SK1-21A/31A
2- 6
．
Changing 1-inch core adapter
1. How to change 1-inch core adapter
Roll paper can be replaced by changing from standard φ 12mm to φ 25.4mm.
1-1. How to attach the the attachment holders
Mount attachment holders to mounting holes.
1-2. How to detatch attachment holder
Clip the attachment holder and pull away in the direction of an arrow below.
2- 7
．
Adjust the paper position
1. How to change the position of Holder arm.
Three types of roll paper ( φ 120mm, φ 102mm, φ 83mm in diameter) is available by setting positoin of
holder arms.
1-1. How to setting
Detach polyslider and pull out shaft, and then detach holder arm.
Next, put a spring on a projection and set the holder arm on the spring.
Finally, put the shatf and fix it by the polyslider.
Mounting holes
Push and attach
1-inch core
adapter
1-inch core
adapter
Pull away from the
Attachment holder.