SANEI ELECTRIC SK1-21A, Technical Manual

Page: 33 / 56

３３
SK1-21A/31A
4- 5
．
Memory switch setting menue
（ 1 ） COMMON SETTING
Menu Default Value Description
PAPER FEED OFF OFF
ON(10mm) / ON(20mm)
ON(30mm) / ON(40mm)
ON(50mm) / ON(60mm)
Enable/disable paper feed after closing the print head.
・
When paper feed is ON, the printer feed the paper as
specified (Xmm) length after closing the print head and
make full-cut after feeding the paper.
・ When paper feed is OFF, the paper is not fed.
・
The value is changeable using the DC2K command.
OFFLINE BUSY ON ON
OFF
Enable/disable OFFLINE BUSY when an error occurs.
＜ At selecting ON ＞
・
The communication becomes OFF-LINE when an error
occurs. The printer stops printing and maintained the
receiving data until the error is cleared.
＜ At selecting OFF ＞
・
The communication becomes ON-LINE when an error
occurs. Receiving data during an error are continuously
processed and printing data are not stored.
・ When bezel is used, this mode is selected.
SELECT
SENSOR Reflection Reflection
Transmission
Select the mark sensor for label printing.
・ Reflection ･･･ Detected by Black mark sensor
・ Transmission ･･･ Detected by Gap sensor.
MARK
DETECTION OFF OFF
ON
Enable/disable the Black mark sensor/Gap sensor
functions.
MARK
RE-DETECTION
OFF OFF
ON
Enables/disables re-detecting function after the paper
setting.
CHARACTER
TABLE PC437 KATAKANA
PC437 / PC850
PC852 / PC857
PC858 / PC863
PC865 / PC866
WPC1252 / PC860
WPC1252_2
PC862 / PC864
WPC1254 / WPC1250
WPC1251 / PC737
Select the characters.
- PC862 font was added after V1.87
- WPCXXXX font was added after V1.68
- PC864 font was added after V1.98
- PC737 font was added after V1.99
PRINT
DENSITY 100% 80% / 90%
100% / 110%
120% / 130%
140% / 150%
Specify the printing density.
PRINT WIDTH Comply with
classified
paper width 80/72
60/56
58/54
83/80 Select the paper width.
(Printing width is set at the factory)
MECHANISM
SPEED 200mm/s 110mm/s
130mm/s
150mm/s
170mm/s
190mm/s
200mm/s
Select maximum printing speed