SANEI ELECTRIC SK1-21A, Technical Manual

Page: 31 / 56

３１
SK1-21A/31A
---COMMON SETTING---
PAPER
FEED = OFF
OFFLINE BUSY = ON
SELECT SENSOR = Reflection
MARK DETECTION = OFF
MARK RE-DETECTION = OFF
CHARACTER TABLE = PC437
PRINT DENSITY = 100%
PRINT WIDTH = 80/72
MECHANISM SPEED = 200mm/s
SELECT NEAR-END = ON
CUT AFTER FEED-SW = NON-CUT
USB DEVICE CLASS = PRINTER
USB PORT NUMBER = NON
COMMAND MODE = MODE-A
BEZEL MODE = NON
SELECT REELER = OFF
PRESENTER MODE = CLAMP/RETRACT
Act. For Driver = INVALID
---INTERFACE
SETTING---
BAUD RATE = 115200bps
BIT LENGTH = 8Bit
PARITY = Non
BUSY CONTROL = RTS/CTS
CTS AVAILABLE = INVALID
---MEMORY
SWITCH---
0x00 0x20 0x28 0x07 0x1E 0x00
0x3C 0x04 0x00 0x00
Serial ID = Non Data
---CURRENT
VOLTAGE---
24.0V
---SENSOR---
Reflection
= 0.8V
Transmission = 0.8V
Bezel sensitivity = 2.0V
Table 2 Example
Common functions
Basic interface functions
Current memory switch by HEX mode
(Lead from DC2K command)
Current supply voltage
Mark sensor detection level
（ Threshold voltage ）