SANEI ELECTRIC SK1-21A, Technical Manual

Page: 8 / 56

８
SK1-21A/31A
1
．
General Outlines
1- 1
．
Product Outlines
SK1-21(2-inch) & SK1-31(3-inch) are open frame printers equipped with Serial (RS232C) and
USB interface. Super-compact design and ruburst body make it possible for installing limited space
enclosures under wide range of operating environment. The reliable SK1 printers performimg
for versatile functions are ideal for a wide variety of kiosk systems.
1- 2
．
Features
■ Small and Ultra-Light Weight , Designed for wide variety of systems and equipments
■ Max 200mm/sec high-speed printing
■
Variety of paper core holders (adjustable for half inch and 1-inch inner core roll)
■ 1D and 2D (Option) Barcode printing
■ Max φ 120mm paper roll as standard
■ Various Sensors built-in : Paper near end, Paper empty, Head open sensor, Black-Mark sensor
(Option), Gap sensor (Option)
■ Wide variety of paper size (58, 60, 80, 83mm)
■ Autoloading function
■
Selectable for Partial cut or Full cut
■ Versatile operating environment
■ Available for Windows driver,Utility Driver and Linux driver
■ Available for Remote Status Monitor
＜ Other functions ＞
 Capable of HEX dump printing and self test printing.
 Various settings of characters, such as enlarged and upside down characters
 Adjustable for printing line space.
 Graphic printing by bit image.
 Downloaded characters and user-defined characters can be printed.
 Adjustable for paper feed amount.
 With Ruled Line command, table layouts can be easily printed.
 Page Mode allows erect/inverse images, clockwise 90 degrees/counterclockwise 90
degrees and overlapping printing.
 Page Mode allows setting the paper length to a maximum of 250mm.
 Using the Image Registration command, the printing layout can be set up beforehand.
 With the Printing Density command, the printing density can be changed.
 The command system conforms to ESC/POS
TM
.
 Capable of registering print images in internal flash memory.