SANEI ELECTRIC SK1-21A, Technical Manual

Page: 53 / 56

５３
SK1-21A/31A
11
．
Ruled Line Command
Command Standard mode Page mode
DC3 A Choose ruled line buffer A
DC3 B Choose ruled line buffer B
DC3 C Clear the ruled line buffer
DC3 D Write dot specification to the ruled line buffer
DC3 L Write line specification of the ruled line buffer
DC3 + Enable the ruled line printing mode
DC3 - Disable the ruled line printing mode
DC3 P Execute printing of 1 dot ruled line
12 ． Function Setting Command
Command Standard mode Page mode
ESC
＠
Initialization
DC2 D Reserve and release a download character registration area
DC2 G Reserve and release a user-defined character registration area
DC2
～
Set printing density
GS ( A Self test print
DC1 Software reset
DC2 R Read a software memory switch
GS G Specify the stored buffering mode / cancel
DC2 K Set the memory switch
13
．
Barcode Command
Command Standard mode Page mode
GS H Set the HRI character printing
GS h Set the barcode height
GS w Set the barcode width
GS k Print barcode
14
．
2D Barcode Command
（
OPTION
）
Command Standard mode Page mode
GS Q Print two dimensional barcode
（
PDF417, MicroPDF417, DataMatrix, MaxiCode, QRCode
）
GS S Change the cell size of two dimensional barcode
15 ． Label Command
Command Standard mode Page mode
DC2 L Set the length of label
DC2 l Label feed
DC2 B Re-detect of marking position
DC2 mrk Set the marking threshold
16 ． Presenter Command
Command Standard mode Page mode
ESC h Select the active mode on the presenter
ESC r 0 Select the presenter operation
ESC r 1 Set the time-out for the retractive mode.
ESC r 3 Select the presenter mode
ESC r @ Reset of the presenter error factor