Sandel ST3400H HeliTAWS, Installation Manual

Page: 17 / 112

1.8 System Part Number
The part number for the Sandel HTAWS is comprised of two parts. The basic Model
designation “ST3400H” and a dash number, ST3400H-xxx. The dash number designates
minor product variations, bezel color and/or NVIS support.
1) ST3400H-000, Gray Bezel
2) ST3400H-001, Black Bezel
3) ST3400H-000N, Gray Bezel with NVIS support
4) ST3400H-001N, Black Bezel with NVIS support
1.9 Installation Kit Part Number
An installation kit is available for the ST3400H.
ST3400H INSTALLATION KIT (P/N 90254-IK)
Qty Sandel P/N Positronic P/N Description
1 32063 DD44F10JVL0
Connector 44 pin
Plastic Hood/Slide Lock and Contacts
1 32062 SD15F10JVL0
Connector 15 pin
Plastic Hood/Slide Lock and Contacts
1 32111 SD9F10JVL0-15
Connector 9 pin
Plastic Hood/Slide Lock and Contacts
1 61044 N/A Flush mount shim
1 61062 N/A 3ATI Clamp
1.10 License Requirements
None.
1.11 Installation and Operational Approval Procedures
The Environmental Qualification Form for the ST3400H included in section 9 of this
Installation Manual should be referenced to the categories appropriate to the aircraft type and
environment into which the ST3400H is to be installed. The environmental category for the
ST3400H should be stipulated on the STC form.
ST3400H - xxxx
Model
Minor
Variation
82046-IM-K ST3400H INSTALLATION MANUAL Page 1-6