Sandel ST3400H HeliTAWS, Installation Manual

Page: 4 / 112

82046-IM-K ST3400H INSTALLATION MANUAL Page iv
Section 4.4: Reformatted. Updated ground bonding note.
Section 5.4: Updated to show that the CM functionality is
reserved for future use. Added text to advise leaving CM
plugged in.
Section 5.5: Updated to show that the CM functionality is
reserved for future use.
Section 6: Retitled to “System Configuration.”
Section 6.11: Added note for when to configure the
ST3400H using the (SW) setting.
Section 6.14: Added text for Mode 1 arming altitude.
Corrected axis titles on Standard Mode-1 curve.
Section 7: Added return to service statement at
beginning of chapter.
Section 7.8: Heading clarified as “Optional Interface”.
N/A column added.
Section 7.9: Heading clarified as “Optional Interface”.
N/A column added. Clarified Result text for Heading
Value.
Section 7.10: Heading clarified as “Option Configuration”.
Text added to indicate NVIS may require additional
installation approval. Additional inputs added. N/A
Column added.
Section 7.11: Heading clarified as “Optional Interface”.
N/A column added.
Section 7.12: Heading clarified as “Optional Interface”.
N/A column added.
Section 7.13: Heading clarified as “Required”.
Sections 7.14: Heading clarified as “Optional Interface”.
N/A column added.
Section 7.15: Heading clarified as “Optional Interface”.
N/A column added. Clarified Result text to add that audio
should also be heard.
Section 7.16: Heading clarified as “Optional Interface”.
Section formatting updated.
Section 7.17: Heading clarified as “Optional Interface”.
Section formatting updated. Section updated for new
SENS mode functionality.
Section 7.18: Section formatting updated.
Section 7.19: Heading clarified as “Optional Interface”.
Section formatting updated.
Section 7.20: Section formatting updated.
Section 7.21: Test step updated for clarity. Section
formatting updated.
Section 7.22: Test step updated. Section formatting
updated.
Section 7.23: Section formatting updated.