Sandel ST3400H HeliTAWS, Installation Manual

Page: 43 / 112

with the configuration information is shown at the top of this page, along with the actions that
may be taken.
The options displayed on the “CONFIG MODULE STATUS” page are as follows.
“DISABLE CM” (CM)
When this option is selected no stored data will be read from or written to the
Configuration Module. Selecting “Disable CM” will allow the installer to go directly to
the Maintenance Index page 1.
Note “ CM ” will appear in the upper right corner to indicate that the configuration module
is not operational.
“ST3400H TO CM”: stored
The current ST3400H configuration is written to the configuration module and stored.
NOTE: When selecting this option ST3400H configuration data will be written
TO the configuration module and overwrite any existing configuration data in the
Configuration Module.
“CM TO ST3400H”: Selecting
Stored Configuration Module data is written to the ST3400H.
NOTE: When selecting this option data FROM the configuration module will
overwrite any existing configuration data in the ST3400H. The configuration
module is unaffected.
As part of the configuration, an aircraft identifier (Tail Number) should be entered on the
systems settings page.
82046-IM-K ST3400H INSTALLATION MANUAL Page 5-2