Sandel ST3400H HeliTAWS, Installation Manual

Page: 70 / 112

7.13 GPS Position (Required)
Select ST3400H to Maintenance Page 10: GPS
SIGNAL FUNCTION RESULT PASS FAIL
GPS position
receiver locked on
with valid signal
GPS POSITION
GPS Lat and Long value displayed
should match position on GPS
Turn off position
GPS receiver.
GPS POSITION
GPS position value Lat and Long will
not be displayed.
GPS position
receiver locked on
with valid signal
GPS ALTITUDE
GPS Altitude should match altitude
displayed on GPS receiver.
Note : Press “VALUE” soft-key and then UP/DOWN soft-keys to access to additional
parameters and GPS Altitude.
7.14 FMS Flight Plan (Optional Interface)
Select ST3400H to Maintenance Page 9: FMS
SIGNAL FUNCTION RESULT PASS FAIL N/A
Flight plan GPS
receiver locked on
with valid signal.
2
FLIGHT PLAN
Verify ST3400H flight plan matches
navigator flight plan
7.15 Traffic (Optional Interface)
Check traffic if interfaced to ST3400H. Perform checkout per Traffic manufacturer’s
installation manual.
SIGNAL FUNCTION RESULT PASS FAIL N/A
Put Traffic device
in self-test mode
TRAFFIC
Traffic test pattern should display on the
ST3400H traffic page and corresponding
audio should be heard on cockpit speakers
or headset
2
May require ground speed greater than 5 knots to display flight plan.
82046-IM-K ST3400H INSTALLATION MANUAL Page 7-7