Sandel ST3400H HeliTAWS, Installation Manual

Page: 100 / 112

4
3 2
A
B
C
D
1 3 4
D
C
B
A
1
COMPUTER CONTROLLED DRAWING
DO NOT REVISE MANUALLY
2
REVISIONS
LTR DESCRIPTION
DATE
A
Initial Release 04/12/2010
B
TITLE
SIZE
DWG NO.
SCALE SHEET
REV
NONE
2401 DOGWOOD WAY
VISTA, CA 92081 USA
CAGE CODE
ST3400H INSTALLATION DRAWING
MOD 3 OF 15
CATEGORY
GPS INTERFACE
ST3400H
P1
34
4
GPS POSITION B
GPS POSITION A
RS-232 TX
RS-232 COM
P
Select 1 of 4 RS-232 TX channel
outputs in the Garmin setup page
7
10
ST3400H
P1
31
17
GPS FLIGHTPLAN B
GPS FLIGHTPLAN A
ARINC 429 TX A
P
46
47
ARINC 429 TX B
46
47
9/10
28/29
58
57
24
23
ST3400H
P1
31
17
GPS FLIGHTPLAN B
GPS FLIGHTPLAN A
RS-232 TX
P
2
14
RS-232 COM
2
14
ST3A22
ST4A22
ST4A22
IAW AR1186 Provision for TSO-C129 GPS Position
05/27/2011
B1
Corrected Note 1. title bock format change, AR1189
07/30/2011
C
Updates for AR1418. Garmin GTN 6XX/7XX Equipment
Selection added. Notes Updated for GTN 6XX/7XX.
REDRAWN (AR1477) - Was sheet 2
Changed Connector designation from P2 to P1 (Zones A-4 & B-4)
Added shield grounds on each interface (Zones A-3 thru D-3)
Freeflight Pin was “23” changed to “10” (Zone D-3)
Added “J2” CALLOUT TO Freeflight 2101 (Zone C-3)
Changed note references to triangle notes 3, 4, 5 & 6 associated
with Garmin (Zones D-3 and B-3)
Added wire numbers & twisted pair ref on each interface
(4 places)
Removed schematic for Trimble RS-422 and reference in note 1.
Added reference to notes 1 & 2 for B-K (Zone A-3)
D
12/09/2013
03/31/2015
4
2
3
5
6
1
6
2
1
NOTES:
BENDIX KING KLN-89/89B/90/90B/94, SUPPORTED IN FUTURE
ST3400H SOFTWARE VERSION 1.4 OR HIGHER.
KLN94 MUST HAVE SOFTWARE VERSION 0106 OR ABOVE INSTALLED
REFER TO CURRENT INSTALLATION MANUAL FOR RS-232 PINS.
For GPS/GNS/GNC SERIES SELECT THE OUTPUT FOR “HW-EGPWS”
FOR GTN SERIES SELECT THE OUTPUT FOR “EXTERNAL GPS”
USE WITH NON-WAAS GARMIN 400/500 SERIES GPS REQUIRES SOFTWARE VERSION
1.06 (NON MOD-A ST3400H) / A1.07 (MOD-A ST3400H) OR HIGHER.
GARMIN GTN 7XX HAS ADDITIONAL CHANNELS 5 & 6 ON P1005
FOR GARMIN GTN 6XX/7XX ARINC 429 CONNECT TO ONE PORT ONLY (9/28) OR (10/29).
GARMIN GTN SETUP:
SELECT GAMA FORMAT 3 FOR THE ARINC GPS 429 OUT
SELECT HIGH OR LOW SPEED AS DESIRED
GPS/GNS/GNC:
SELECT GAMA 429 GRAPHICS W/INT
SELECT HIGH OR LOW SPEED AS DESIRED
4
2
3
5
6
1
E
10/14/2016
Updates for AR2363 Updated Note 4 to include requirement
to specify ST3400H software versions when using non-WAAS
Garmin 400/500 series GPS. Revised Notes 3,4,& 6 for
clarity. Updated note references in zone D-3 & B-3.
6