- 4 -
FP120D,FP145D
The - series are suitable for crimping the joint and air, Hydaulic and water hose. Be careful for
rigidity of the working material(s), don’t try capacity that extend the specification.
1) Supply voltage: 0.9 - 1.1 nominal supply voltage
2) Source frequency: 0.99 - 1.01 nominal frequency
3) Ambient temperature: 5°C - 40°C
4) Altitude: shall be at altitudes up to 1000m above mean sea level
5) Relative humidity: not exceed 50% at 40°C
6) Atmosphere: Free from excessive dust, acid fume, corrosive gases and salt.
7) Avoid exposing to direct sunlight or heat rays which can change the environmental temp.
8) Avoid exposing to abnormal vibration.
9) Please add the
Greasing
oil timely.
If you have any question, please refer to our agency or company.
This machine was designed for certain applications only. We strongly recommend that this mache
NOT
be modified and/or used for any application other than for which it was designed. If you have
any question relative to itsapplication
DO NOT
use the machine until you have had detail instruction
from your dealer.
Generally, this machine will be installed on the following conditions:
1.2. Using Restriction
CE Instruction Manual
www.samway.com
