- 22 -
FP120D,FP145D
installed the master dies with change tool 1 change of a single die
(1) Before installing dies, make sure that master dies are clean.
(3) After that, start the motor and select manual mode.
(4) Set the swaging diameter dial to 0. 0.
(5) Open the master dies.
(6) Prior to installing dies, clean the contact surfaces of both
the die and master dies properly to avoid damaging the
surfaces.
(7) Pull the pin in the master die with the change tool delivered together with the machine.
(8) Insert the die with the retaining pin into the master die, die number always towards you.
(9) Release the pull pin.
(10) After installing all the dies, make sure they are straight and properly seated in the master dies.
(2)
STOP THE MOTOR PRIOR TO CLEANING DIES.
installed the master dies with change tool 1 change of a single die
(1) Before installing dies, make sure that master dies are clean.
(3) After that, start the motor and select manual mode.
(4) Set the swaging diameter dial to 0. 0.
(5) Open the master dies.
(6) Prior to installing dies, clean the contact surfaces of both the die and master dies
properly to avoid damaging the surfaces.
(7) Pull the pin in the master die with the change tool delivered together with the machine.
(8) Insert the die with the retaining pin into the master die, die number always towards you.
(9) Release the pull pin.
(10) After installing all the dies, make sure they are straight and properly seated in the master dies.
(2)
STOP THE MOTOR PRIOR TO CLEANING DIES.
Installing the Second Master die set
Installing the Master die set change of a sigle die
CE Instruction Manual
www.samway.com
