WEC8500/8050 Maintenance Manual
Version 5.1
Samsung Electronics America
page 55 of 87
CHAPTER 3.
Connection Management
with AP
This chapter describes the possible problems and their solutions when connecting to the
access point (AP).
3.1 CAPWAP Status is not RUN
3.1.1
AP network setting error
Symptoms
CAPWAP Status of the AP is not changed to 1/2/0 and cannot be connected to the APC.
WEC8500# show ap summary config
AP Mgnt interface IP : 10.10.10.11 (vlan1.110)
AP_ID Profile AP_NAME MAC_Address IPv4Addr State Location
====== ======= ============== ================ ======== ===== ========
2 ap_2 AP_0000aa161616 00:00:aa:16:16:16 0.0.0.0 1/2/0
Possible Causes
IP setting of the AP is incorrect.
IP setting of the AP is incorrect in the APC.
IP of the AP is setup in duplication.
The AP is setup for DHCP, but the DHCP server does not respond or allocates an IP
address in violation of the IP policy.
The default VLAN settings are incorrect.
