WEC8500/8050 Maintenance Manual
Version 5.1
Samsung Electronics America
page 22 of 87
3) Check the syslog settings. Execute the ‘show syslog conf’ command to check that
‘Syslog Mode’ is sent to ‘Enable’, and check the Syslog filter information (‘Syslog
Level filter’).
If the filter information is not setup, execute the ‘syslog level’ command to configure
the following settings.
WEC8500# show syslog conf
------------------------------------------------
Syslog Server Configuration
------------------------------------------------
Syslog Mode : Enable
Syslog Level Filter : notice
Host #1 IP Address : 192.168.0.36
UDP Port : 514
Host #2 IP Address : 192.168.0.99
UDP Port : 510
4) Check that the IP address and port of the syslog server are correct. If the information is
not correctly entered, execute the ‘syslog add’ command to setup the syslog server
information.
WEC8500/configure# syslog add 192.168.0.99 udpport 510
