Samsung SVR-1630 User Manual Download Page 64

Page: 64 / 78

SVR-1630

오류

스타일이

정의되어

있지

않습니다

2004.07.2001 (v 1.0)

Samsung Techwin CO.,Ltd.

5.8.1 Disk

Manager

The Hard Disk mounted is automatically identified.

Select Disk

Selects the HDD to set.

Action

Selects the desired action in the “Add/Remove/Format/Confirm Removed/Add used” menu.

[Add]

: adds an

HDD for recording. The added HDD is automatically

formatted.

[Remove]

: Logically removes the currently used HDD. The HDD can be reused without

formatting using the “Add used” command later.

[Confirm Removed]

: completely deletes the HDD when it is separated from the SVR-1630 but

remains in the list.

[Add used]

: uses the HDD previously formatted in DVR without formatting

using this

command. However, “ Add Used’ can be applied only when the
HDD is added as the Primary HDD.

Summary of Contents for SVR-1630















































































Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands

Samsung SVR-1630, User Manual

Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands