Samsung SVR-1630 User Manual Download Page 44

Page: 44 / 78

SVR-1630

오류

스타일이

정의되어

있지

않습니다

2004.07.2001 (v 1.0)

Samsung Techwin CO.,Ltd.

5.4.5 Setup by Channel

Event Source (*=All)

- You can select up to 4 Sensor/MDs and text inputs in the Event Source menu.

- Select the Sensor/MD by pressing the relevant number button.

- Set On/Off using the arrow keys for selecting text.

- Set the PTZ Preset according to the relevant event input.

Record Rate/Quality

There are a total of 4 setting conditions (Low/Standard/High/Customer).

Setting conditions apart from “Customer”, “Rate (fps)” and “Quality” are automatically interlocked: when

1fps/Q3 & “Low”, 5fps/Q3 & “Standard”, 15fps/Q3 & “High” are set, “Customer” Rate (fps) and

Quality can be set separately. The setting conditions for “Event Record”, “Standard” and “Pre Record /

Post Record Time” are set to one second each.

Pre Record Time (sec)

The Pre Record Time can be set up to 10 seconds.

Post Record Time (sec)

This menu can be set to up to 60 seconds.

Summary of Contents for SVR-1630















































































Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands

Samsung SVR-1630, User Manual

Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands