Samsung SVR-1630 User Manual Download Page 40

Page: 40 / 78

SVR-1630

오류

스타일이

정의되어

있지

않습니다

2004.07.2001 (v 1.0)

Samsung Techwin CO.,Ltd.

5.4.2 Motion Detection Setup

This menu is to set the MD of each channel. All channels (Cam 1~Cam 16) are set to the same

conditions and can be set up separately.

Motion Detection

Sets seven MD sensitivities; Off, Lowest, Low, Standard, High, Highest

MD Area

Sets the MD Area. You can set 64 (8(H) X 8(W)) areas.

The default value is “Select All”. Press the “Custom Area” button, and the MD Area setup window is

opened.

Include Video Loss

This menu is to set whether, when no video signal is detected, it should be taken as MD. It can be set to

Yes or No.

<Note>

Press the “Apply” button for all channel setup. If this is not done, the setting is not applied.

Summary of Contents for SVR-1630















































































Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands

Samsung SVR-1630, User Manual

Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands