오류
!
스타일이
정의되어
있지
않습니다
.
SVR-1630
Samsung Techwin CO.,Ltd.
2004.07.2001 (v 1.0)
13
Basic Configuration
3. Monitoring
When the SVR-1630 is on, images from all channels are displayed in Monitor Mode. (When 8
Channels are connected, the images are displayed on the 3x3 split screen). This section is for using
all the SVR-1630 monitoring modes.
<Cautions>
The SVR-1630 supports dual monitors (A and B). Monitor A (Normal) supports all the functions
described below and Monitor B (Spot) doesn’t support split screen, or Menu and Zoom functions. When
Monitor A is in Playback Mode, Monitor B doesn’t work in Playback Mode.
Therefore the functions described below are based on Monitor A.
In addition, Monitor A should be activated for functional controls.
3.1 View Basic Screen
- When the power is switched on, the SVR-1630 starts automatically.
- The LED goes on and booting is started.
- After the completion of booting, the screen is
displayed in split display mode, depending on
the number of channels connected (the figure
to the right is an example of 4 Channel
display)
※
If a User Password is set, the Password
Input window is shown.
3.2 View Single Image in Full Screen
- Enter the channel number to view.
- Press the [MULTI] button, and the split
screen is displayed again.
3.3 View
Multi-Screens
- Press the [MULTI] button to simultaneously
view multiple channels.
- Each time the [MULTI] button is pressed, the
screen is switched to 2x2, 3x3 and 4x4 Split
Screen Mode in sequence
