Samsung SVR-1630 User Manual Download Page 45

Page: 45 / 78

오류

스타일이

정의되어

있지

않습니다

SVR-1630

Samsung Techwin CO.,Ltd.

2004.07.2001 (v 1.0)

5.5 Event

Action

Setup

This menu sets matters such as the Relay Command according to each time schedule. Event action

is set to four time zones: Weekday Day, Weekday Night, Weekend Day, Weekend Night. It is

necessary to set Replay, Buzzer and E-mail to activate event actions after the schedule setup.

5.5.1 Event

Schedule

Select Action Source

For Relay 1~Relay 4, Buzzer and E-mail, up to 4 Sensors and MDs can be set. Or it can be set to ANY.

For text, you can set to Yes or No.

Press the relevant number button to select the Sensor/MD.

Special Time

Decides whether to apply the setting values above to specific time zones.

<Note>

1. All Channel Setup is applied to the time schedule in the same way.
2. Press the “Apply” button to apply All Channel Setup.

Summary of Contents for SVR-1630















































































Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands

Samsung SVR-1630, User Manual

Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands