Samsung SVR-1630 User Manual Download Page 19

Page: 19 / 78

오류

스타일이

정의되어

있지

않습니다

SVR-1630

Samsung Techwin CO.,Ltd.

2004.07.2001 (v 1.0)

3.11 Search System Log

Press the ‘SEARCH’ key, and the menu for selecting events and

system

logs appears. Select the

System

Log

in the menu, and you can search for system logs.

Up to 1,000 logs can be saved. When the number of logs exceeds 1,000, the oldest log is deleted.

The log types are described below.

Power On : The power is connected.

Power Off : The power is disconnected correctly using the switch on the front.

Power Interrupt : The power is disconnected in error.

Config Changed : The configuration is changed by the menu or network manager.

Record Off : Recording is stopped by pressing the REC switch.

Record On : Recording is resumed by press the REC switch.

Time Shift Start : When the time is changed, the time before the change is displayed.

Time Shift Finish : When the time is changed, the time after the change is displayed.

Summary of Contents for SVR-1630















































































Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands

Samsung SVR-1630, User Manual

Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands