Alignment and Adjustments
6-3
Samsung Electronics
6-1-2 Head Switching Point Adjustment
1) Playback the alignment tape.
2) Intermittently short-circuit the two Test Points on Main PCB while setting the adjustment mode. (See Fig. 6-2)
3) Press the “1, 0” buttons; remote control adjustment operates automatically. (See Fig. 6-1)
6-1-3 NVRAM Option Setting
1) Intermittently short-circuit the two Test Points on Main PCB. (See Fig. 6-2)
2) Press the “1, 4” buttons on the remote control. The option setting is appears. (See Fig. 6-3)
3) Select the option number (See table 6-1) of corresponding model with “ ,
, , ” buttons on the
remote control.
4) After selecting the option number is completed, press the “ ” button of remote control.
(If “ ” button is pressed, the selected number is changescolor. ; See Fig. 6-4)
5) Press the “ENTER” button of remote control again to store the option number.
6) Turn the Power off.
1) NVRAM Option is adjusted in the factory.
2) In case Main PCB Micom (IC601) and NVRAM (IC605 ; EEPROM) are replaced, be sure to set the corresponding option number of the
required model. (If the option is not set, the unit will operate.)
<Table 6-1 NVRAM Option Table>
CNG : OK SAVE : RETURN
01
02 03
04
05
06
07
08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56
57 58 59 60 61 62 63 64
65 66 67 68 69 70 71 72
Fig. 6-3
MODEL
OPTION NUMBERS
SV-DVD50/XEF
2, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 20, 21, 26, 32, 33, 34, 35, 36, 38, 40, 45, 47, 61, 63, 65, 69
SV-DVD50/XEU
3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 27, 32, 34, 38, 40, 41, 45, 47, 61, 63, 65, 69
SV-DVD50/XEUI
3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 25, 26, 32, 34, 38, 40, 43, 45, 47, 61, 63, 65, 69
SV-DVD50/XEG, XET
2, 4, 5, 6, 7, 9, 10, 11, 12, 13, 15, 32, 34, 36, 38, 40, 42, 45, 47, 61, 63, 65, 69, 72
SV-DVD50/XEC, XEE, XEN
2, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 32, 34, 36, 38, 40, 42, 45, 47, 61, 63, 65, 69, 72
SV-DVD50/XEB
2, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 20, 21, 26, 32, 33, 34, 35, 36, 38, 40, 42, 45, 47, 61, 63, 65, 69, 72
SV-DVD50/EUR, XEO
2, 4, 6, 7, 8, 9, 10, 11, 12, 13, 15, 20, 32, 33, 34, 36, 38, 42, 45, 47, 61, 63, 65, 69, 72
SV-DVD50/XEV
2, 6, 7, 8, 9, 10, 11, 12, 13, 15, 20, 21, 32, 33, 34, 36, 37, 39, 42, 45, 47, 54, 61, 63, 65, 69, 70
PLEASE WAIT
01
02 03
04
05
06
07
08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56
57 58 59 60 61 62 63 64
65 66 67 68 69 70 71 72
Fig. 6-4
Summary of Contents for SV-DVD40
