core1000-A-00-A
Voltage Input Type
Digest of Operation Manual
Cores Corporation
©All rights reserved
Dear Customers,
We thank you for your purchase of our Digital Panel Recorder
(the “Product” ).
This operation manual provides information on the function and
performance of the Product and how to handle it. So please read
this manual carefully before starting to use the Product and keep
this manual within your easy reach for ready reference. You can
download the update of this digested manual as well as the
Operation Manual for more details at Cores’ Home Page
( http://core1000.jp ).
Notice:
1. All rights relating to the information in this document are reserved by Cores Corporation
( “Cores” )
2. No part of this document may be reproduced or transmitted in any form, by any means
and for any purpose without Cores’ prior written permission.
3. The contents of this document is subject to change without prior notice.
4. Please contact Cores or its distributors should you have any inquiry, or find any errors
or omissions as to or in this document, though reasonable care has been taken in the
edition of this document.
Safety Instructions
Supply Items
Failure to follow the instruction could cause serious
injuries, burns or deaths as well as great product or
property damage.
DANGER
Failure to follow the instruction could cause minor
injuries or burns as well as product or property
damage.
Failure to follow the instruction could cause injuries or
burns as well as great product or property damage.
WARNING
CAUTION
1. Do not apply an improper voltage from an improper power source to the Product to
avoid fire, electrical shock or property damage.
2. Do not open the cover of the main unit of the Product where the temperature
becomes very high and the wires carry high voltage to avoid getting injured or burnt
from electrical shock.
1. Switch off the power source when connecting or disconnecting the cable to avoid
damaging the Product.
2. Do not switch off the power source during setting to avoiding losing all or part of the
input data for the setting.
3. Do not use the Product where it is exposed to the sun to avoid excessive heat
accumulation inside which may possibly cause its functional failure.
4. Do not supply any other voltage than the rated one to the Product.
ɡ
Specifications
ɡ
Parameter List
ɡ
Installation
Warranty
Interface and compatibility with
other systems
The introductions of how to set and use the Product with any other systems, products or
equipment provided in the documents of Cores are only examples. Please confirm on
your own, in addition to the contents of this document, relevant and applicable rules,
standards, specifications, procedures, electrical wirings, capacities and settings and so on
from a view point of safe and correct interfacing and compatibility when connecting or
incorporating the Product into any other systems, products or equipment of different
make. Cores does not accept liability for any such interfacial and compatibility problems
of the Products with other systems, products or equipment nor for whatever damages
including but not limited to loss of property, personal injuries and deaths which may be
caused therefrom.
CORE1000AD-E-01
August 1, 2009 (1st Edition)
Input signals
No of measurement channels
Measurement range
Meas accuracy
Sampling *1
Power supply voltage
Power consumption
Dielectric strength (50/60Hz)
Insulation resistance
Max input voltage
Input impedance
Input method
Input terminal type
Input
Output
Display type
External dimensions
Weight
Vibration resistance
Ambient operating temp
Accessories
Optional items
External triggers
Reset
Voltage
2
±1.9999V / ±19.999V / ±199.99V
±0.05% of rdg + 2digit (23
℃
±5
℃
)
0.1*/0.2*sec
0.5/1/2/5/10/15/20/30sec
1/2/5/10/15/20/30/60min
100VAC (85
〜
250VAC), 24VDC(20
〜
28VDC)
85
〜
250VAC: 10VA max, 24VDC: 5W max.
1500VAC for 1min between AC supply terminals and FG
500VAC for 1min between DC supply terminals and FG
500VAC for 1min between input terminals and FG
350VAC for 1min between input terminals
50MΩ minimum between input terminals and FG (at 500VDC mega)
250 Vp-p between input terminals IN+ and N-
1MΩ minimum
Floating non-equilibrium supply, insulated input to each CH
M3 screw type
Non-voltage contact signals
Max load voltage: 30VDC
Max residual voltage/current on short circuit:2V / 2mA
Photo-coupler output
Max load voltage: 30VDC / Max load current: 50mA
Max saturated voltage: 1.2V at 50mA
Vacuum fluorescent display
96 (W) × 48 (H) × 142 (D) mm (excluding extrusions)
500 g (including packing)
Applicable to MIL-STD-810D
0
℃
to 50
℃
(with no icing or condensation)
Digest of Operation Manual
Installation hardware × 2 (including screws)
microSD card (1GB) and accessories *2
RS232C cable (mini-jack
⇔D
-SUB9 pin cable)
Installation hardware × 2 (including screws)
microSD card (1GB) and accessories *2
Please follow the safety instructions which, according to the degree of respective potential
risks, are symbolized as follows:
The package of the Product consists of the following items. Please confirm that there
is no missing part when unpacking the contents.
Contact at Cores
Sales Group
Cores Corporation
Tel: +81-554-45-1027
Fax: +81-554-45-6200
http://core1000.jp
〒
402-0004
338-2 Furukawado, Tsuru City, Yamanashi Pref., Japan
Open 09:00
〜
17:00 hours
(except on Saturdays, Sundays, national holidays
and the year-end and new-year holidays.)
Warranty and After Sales Service
As stated in the Warranty Clause above, the warranty
period of the Product is one (1) year after its purchase or
delivery. Please fill in necessary items on the column
below and fax it to Cores in case of failure of the product.
Type : core1000-
S/N :
Name and address of User :
●
External Dimensions (mm)
●
Panel Cutout Dimensions
●
Installation onto Panel
75 min
120 min
92
+0.8
-0
45
+0.6 -0
96
142
48
①
⑤
②
④
③
⑥
⑦
⑧
⑨
⑪
⑫
⑩
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
PV display
Position /
Setting meter display
CH display
Comparison LED
Recording LED
MENU Key
/ REC Key
▼/ STOP Key
ENT Key
microSD card slot
Front jack
Rubber cover
Displays PVs
Displays the setting of Peak, Bottom or Peak to Peak when “Peak Hold” is
selected as well as the position of the PV as compared with a desired scale
when “Comparator” is selected.
Displays CH when “Dual Channel” is selected. CH is not displayed when
“Single Channel” is slected.
LED is on to indicate comparative output status.
LED is on when access is being made to the microSD card. LED flickers when
recording is under way.
For menu operations and for canceling set items in parameter setting.
For changing setting items. Keep pressing STOP key and press this key while
displaying data to start recording.
For changing setting items. Keep pressing this key and press ENT key while
recording to stop recording.
For deciding setting items in parameter setting and for changing displays while
displaying data.
Installs and uninstalls a microSD here.
For external communication.
Protects the microSD card slot and the front jack.
▼
NO
Function
Part name
classed
as
Group A
classed
as
Group B
Icon
Parameter
(classed as Group C)
Setting change
while recording
Default
Setting Range
Parameter
(classed as Group C)
Setting change
while recording
Default
Setting Range
classed
as
Group A
classed
as
Group B
Function
Range Set
Zero X1
Zero Y1
FullScale X2
FullScale Y2
Decimal Point
RefValue Set
Unit Set
Filter Set
Display Mode
Comparator
Peak Hold
Comparator H
Comparator L
Hysteresis H
Hysteresis L
Comp.Output H
Comp.Output Pass
Comp.Output L
Forced Zero
Reset Type
OneShot Type
Sampling
REC Mode
REC Start
REC End
Comparator
±199.99V
-199.99
-199.99
+199.99
+199.99
2 decimal place
+000.00
V
1
Normal
Free Run
Peak
+299.99
-299.99
00.00
00.00
N.O
N.O
N.O
Disable
Edge
Output Only
1sec
Onetime
OFF
OFF
Comparator/ Peak Hold
±1.9999V
±19.999V
±199.99V
-19999
〜
+19999
-29999
〜
+29999
-19999
〜
+19999
-29999
〜
+29999
Nil
〜
4 decimal place
-29999
〜
+29999
1
〜
10
Normal/Bar Graph
Free Run/One Shot
Peak/Bottom/PeakToPeak
-29999
〜
+29999
-29999
〜
+29999
0000
〜
2999
0000
〜
2999
N.O/N.C
N.O/N.C
N.O/N.C
Disable/Enable
Edge/Level
Output Only/
Output & Value
* Setting of 0.1 sec and 0.2
sec are effective only when
the Basic Sampling is set at
0.1 sec
Onetime/Endless
20YY/MM/DD HH:MM:SS
ON/OFF
20YY/MM/DD HH:MM:SS
ON/OFF
×
×
×
×
×
×
×
×
×
×
○
×
×
×
○
○
○
○
×
×
○
○
ɡ
Part names and Functions
ɡ
Recording modes
Icon
PowerOn Delay
Channel Set
Basic Sampling
Screensaver
System Time
System Reset
Baudrate
Communication Port
Out Data
Calibration
LED Test
Key Test
Ext.Input Test
Ext.Output Test
Display Test
Backup Time
Osc.Precision
AVDD
VREF
Rear Port Test
Front Port Test
RS-485 Port Test
S/N
Ver.
Card Setup Time
Card Access Time
Card Type
1sec
Dual Channel
0.1sec
OFF
2000/01/01
00
：
00
：
00
Cancel
9600bps
Front
OFF
±199.99V
OFF
-
-
Open
OFF
-
-
-
-
-
-
-
-
-
-
-
1
〜
99sec
Dual Channel/
Single Channel
0.1/0.5 sec
ON/OFF
20YY/MM/DD HH:MM:SS
Cancel/OK
4800/9600/19200/38400
Front/Rear
ON/OFF
±1.9999V
±19.999V
±199.99V
CH.1/CH.2/REC
MENU/REC/STOP/ENT
TRG1/RESET1/
TRG2/RESET2
LO1/Pass1/HI1
LO2/Pass2/HI2
ON/OFF
-
Good within 1 count
Good within 5.00±0.25V
Good within 2.50±0.125V
Loopback Good/Bad
Loopback Good/Bad
Loopback Good/Bad
-
-
R(Read)/W(Write)
Ver/Type
○
×
×
○
×
×
○
○
○
×
×
×
×
×
×
×
Including the operation manual, the warranty
certificate, and one adapter each for
SD Memory Card and miniSD Card
●
The main unit of the Product
●
Accessories
microSD card (1GB) ×1
Installation hardware ×2
ޓޓޓޓޓޓޓޓ
This Digest of Manual Operation
including screws (2pcs)) (on A3 sized paper)
ڎ
Insert the Product into the installation cutout in the panel.
ڎ
Insert one piece each of the installation hardware on both sides
ޓ
of the Product and tighten the screws until the both installation
ޓ
hardware touch the panel to fix the Product in place.
■
Keep the Product horizontally when installing it onto the panel.
■
The thickness of the panel should be 1 to 8 mm.
*2 Instruction Manual, Warranty Certificate, Conversion adapters for SDMemory card and miniSD card (1 pc each).
*1 Sampling is the interval of each measured data to be recorded on microSD card. The samplings of 0.1 sec and 0.2 sec are
available only when the basic sampling is set at 0.1 sec.
①
Onetime
Recording
Saving starts
Saving ends
Max 100 folders can be made
1st folder
100th folder
②
Endless
A maximum of 100 folders are created on an SD card on
the “Onetime” mode, and one each folder can save a
maximum of 720 CSV files of recorded data.
The recording automatically stops when the 100th folder
has completed saving up to 720 CSV files.
One single folder is created on an SD card on the
“Endless” mode, and the folder can save a maximum of
720 CSV files of recorded data. When the number of CSV
files exceeds 720, old files are automatically, and one by
one, replaced with new ones for the recording to keep
going on.
mV, V, mA, A, VA, %,
J, Pa, Ω, N, m, W,
℃
,
%RH, m , K,
゜
F, g, mm,
rpm, Hz, lx, A/m, Wb,
mWb, T, mT,
（
No unit
）
3
Digital Panel Recorder
Folder name: Year, date, number
Saving starts
Max 720 files can be saved
* The icons are classified into 2 groups, Groups A and B, according to their respective levels of
broadness in representation, and parameters in Group C. The items in Group B have narrower or
more detailed representation than the items in Group A.
1.
2.
3.
Cores warrants that the Product is free from defects in materials and workmanship for
a period of one (1) year from the date of purchase or delivery.
ޓ
Under this warranty, Cores is responsible for making good the defects of the Product ,
which is found and reported to Cores within the aforesaid one (1) year warranty period,
by repairing or replacing the defective part or unit.
This warranty clause, however, does not apply to such cases as follows:
1) Defects due to or caused by misuse, mishandling, or use or operation under conditions other
than specified in the operation manuals.
2) Defects due to or caused by repairs, replacements , modifications, removals or relocations
performed by any other parties than Cores or its designated agents, distributors or
subcontractors.
3) Normal wear and tear and consumables.
4) Defects due to or caused by fires and earthquakes, floods, and any other accidents
irrespective of whether they are of Force Majeure nature or not.
5) Any indirect, special, consequential and punitive damages, loss of availability for use of the
Product, loss of business, loss of profits and loss of data and software including but not
limited to those claimed by any third party.
