73 Tools
•
The phone recognizes the digits one, two, three, four, five, six, seven, eight,
nine, zero, and oh. The phone does not recognize numbers such as “one
eight hundred” for “1-800”. Instead, say “one-eight-zero-zero”.
•
The phone recognizes only valid 7, 10 or 11 digit North American phone
numbers.
•
If your phone does not usually recognize you correctly when you are using
voice Call, try adapting Call to your voice, which can significantly improve
accuracy for some speakers. (See "Configuring Voice Adaptation" on page
75 for details.)
To place a call using voice Call:
1.
Activate voice recognition by pressing and holding
. (The phone
prompts you for a command.)
2.
Say
Call
. (The phone prompts you to say the number.)
3.
Say either a name stored in your Contacts or a valid 7, 10 or 11 digit
North American phone number naturally and clearly.
•
If the phone asks you, “Did You Say,” followed by the correct
number, say
Yes
. (You can also select the correct number from those
displayed on the screen by pressing
on the correct number. The
phone will then dial the number.)
•
If the phone asks you, “Did You Say,” followed by an incorrect
number, say
No
. (If there are other alternatives, the phone will prompt
you with the next one. You can also press the navigation key up or
down to select the correct number from the Choice List, and then
press
to dial.)
•
If you said a name listed in your Contacts that has more than one
number associated with it, the phone displays the different locations
(
Mobile
,
Home
,
Work
,
Pager
,
Fax
,
Others
) and asks you which one
to dial. Say one of the location names and the phone will dial the
number for the location you specified.
Note:
In some cases, the phone might ask you to repeat a name or number. Make
sure that the number is a valid 7, 10 or 11 digit North American phone number, and
then say the number again. If the number isn't valid, or if the phone still doesn't
understand the number on the second try, it will not place a call.
r540_UG.book Page 73 Tuesday, January 13, 2009 10:58 AM
