manualshive.com logo in svg

Samsung SMO-210DN, User Manual

Share
Download
Samsung SMO-210DN User Manual Download Page 87

English-8-5

- SINGLE SCREEN DISPLAY

If users want to see the camera image at full mode or smaller, select a target

camera with NEXT channel or CHANNEL SELECT keys.

After camera selection, camera image can be displayed at full screen.

*

AT SINGLE DISPLAY

- QUAD MODE DISPLAY

A user can select the QUAD mode.

QUAD- A -> QUAD - B -> QUAD - A -> ...

•                       

QUAD MODE DISPLAY

QUAD - A : QUAD DISPLAY MODE From Camera1 to Camera4

QUAD - B : QUAD DISPLAY MODE From Camera5 to Camera8

Original Size

Large Size

- Auto SEQUENCE DISPLAY MODE

Press the sequence key in the single or QUAD mode to display the screen in sequence.

If the DWELL TIME SETTING of SETUP MENU is set to 3 seconds and the 

SEQUENCE KEY is pressed at this time, the operation will be carried out as follows.

(Channels with no signal will be skipped while single screen is auto-switching)

* SINGLE MODE SEQUENCE DISPLAY

->  

Press SEQUENCE KEY When SINGLE MODE (camera select key) is displayed at full screen.

* QUAD MODE SEQUENCE DISPLAY

->

Press SEQUENCE KEY When QUAD - A (QUAD - B) MODE is displayed.

- SAVE MODE

Press the SAVE PATH KEY to change the name of the DIRECTORY.

Summary of Contents for SMO-210DN











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands