manualshive.com logo in svg

Samsung SMO-210DN, User Manual

Share
Download
Samsung SMO-210DN User Manual Download Page 42

English-3-4

KEY

SEQUENCE

LIVE/PB

/TRIPLEX

Navigation Key

(Up, Down, Left,

Right, ENTER)

USB JACK

POWER

FEATURE

Pressing SEQUENCE button in Single Screen will switch and show screen
of channel that currently has video input. Pressing the same 
button In QUAD Screen will switch and show QUAD-A/QUAD-B Screen.

Video being displayed is shown on 16 sub-screens. PB sub-screens
are shown in upper screen, LIVE sub-screens are shown in the lower
screen at the same time.
Pressing the button once more will switch to LIVE MODE, and
pressing yet again will switch to PB MODE.

Up, Down, Left, Right, and ENTER key.

A USB 2.0 that can back up the video/audio signals currently recorded
in HDD by using external memory stick through a USB cable.

Turns the power on and off

Note

NO   

15

16

17

18

19

Pressing the Sequence 
button while in PIP mode 
will switch to the PIP
source.

Summary of Contents for SMO-210DN











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands