Samsung SMO-210DN User Manual Download Page 53

Page: 53 / 138

English-5-5

3. PICTURE RATE

- Set numbers of fields to be recorded.
- Maximum number is 60 IPS.

[1/2.5/5/7.5/10/15/30/60 IPS]

- Select page number per second using

key. Use key to change it.

❇

When CH1 is recorded, the page number per second is 30 IPS per CH regardless of picture rate.

4. DISK END MODE

- Setting to STOP will stop recording when HDD becomes full during recording.
- Setting to CONTINUE will overwrite previously recorded data with the one currently being

recorded. The oldest data saved in HDD will get overwritten first.

[CONTINUE/STOP]

- Use

, key to change the setup.

5. DISK END ALARM TONE (Notice Mode when HDD is full)

- When DISK END MODE is set to STOP, setting this to ON will make ALARM TONE ring when

HDD is full during recording. If it is set to OFF, ALARM TONE will not ring. This feature won’t
be activated unless DISK END MODE is set to STOP.

[ON/OFF]

- Use

key to change the setup.

6. RECORD TIME MARK

- Setting to ON will show the time when the recording is done during playback, Setting to OFF will not

show it.

[ON/OFF]

- Use

, key to change ON or OFF.

7. RECORD TITLE MARK

- Setting to ON will show the title when the recording is done during playback, Setting to OFF will not

show it.

[ON/OFF]

- Use

, key to make change.

240

7.5

3.75

1.875

1.25

0.9375

0.625

0.3125

0.125

7.5

2.5

INTERVAL

IPS(1ch)

IPS(8ch total)

Summary of Contents for SMO-210DN











































































































































Search results

Summary of Contents for SMO-210DN

Reviews:

Brands by name

Popular brands

Samsung SMO-210DN, User Manual

Search results

Summary of Contents for SMO-210DN

Reviews:

Brands by name

Popular brands