manualshive.com logo in svg

Samsung SMO-210DN, User Manual

Share
Download
Samsung SMO-210DN User Manual Download Page 4

English-iv

IMPORTANT SAFEGUARDS

Caution

Power source is indicated on the rear of the set. It contains high-voltage parts. 
If you remove the cover, it may cause fire or electric shock. Do not remove the
cover by yourself. (Control switches are at the front of the monitor.)

1. Read Instructions :

All the safety and operating instructions should be

read before the appliance is operated.

2. Retain Instructions :

The safety and operating instructions should be

retained for future reference.

3. Heed Warnings :

All warnings on the monitor and in the operating

instructions should be adhered to.

4. Follow Instructions :

All operating and user instructions should be

followed.

5. Cleaning :

Unplug this monitor from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

6. Attachments :

Do not use attachments not recommended by Samsung

as they may cause hazards.

7. Water and Moisture :

Do not use this monitor near water. For example,

near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet

basement or near a swimming pool. etc.

Summary of Contents for SMO-210DN











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands