Samsung SMO-210DN User Manual Download Page 73

Page: 73 / 138

6-2) Record Stop

Click the stop button to stop the data being recorded.

- REC mark disappears and the recording is stopped.

Note

If the user user presses the menu button during the recording, the recording is continued and
the menu screen is not displayed.

6-3) Record Lock

1. Record Lock

To set "LOCK" during the recording, press the "REC LOCK" button. REC LOCK LED turns

on when pressing the "REC LOCK" button. The recording does not stop when

"REC LOCK" is engaged, even if the Stop button is pressed.

2. Cancel the Record Lock

Press the "REC LOCK" button again to cancel the record lock.

Note

The REC/REC LOCK button does not save the last setup when the system reboots.

05/01/05

00 : 00 : 01

CAM7

CAM8

CAM4

CAM5

CAM6

CAM1

CAM2

CAM3

05/01/05

00 : 00 : 01

CAM7

CAM8

CAM4

CAM5

CAM6

CAM1

CAM2

CAM3

English-6-3

Summary of Contents for SMO-210DN











































































































































Search results

Summary of Contents for SMO-210DN

Reviews:

Brands by name

Popular brands

Samsung SMO-210DN, User Manual

Search results

Summary of Contents for SMO-210DN

Reviews:

Brands by name

Popular brands