Samsung SMO-210DN User Manual Download Page 77

Page: 77 / 138

English-7-3

7-2) DATE TIME SEARCH

1. DATE[YY/MM/DD]

- Set a date to search[YY,MM,DD].

- Use the

, key to change the date.

2. TIME[HH:MM:SS]

- Set a time to search.

- Use the

key to change the time.

3. SEARCH START

- Input [YY/MM/DD] and [HH:MM:SS] to search and press the ENTER ( ) button.

And then, the related data is searched.

- Use the

, key to change.

7-3) RECORD EVENT SEARCH

After pressing the search button, select the record event search menu.
The following screen is displayed.

If you press the REC button among the data recorded in the HDD, the data list
recorded is displayed.
Select the record event list with the UP/DOWN/LEFT/RIGHT(

)

button. Press the ENTER button to search it.

DATE [ YY / MM / DD ]

05/01/05

TIME [ HH : MM : SS ] 00:00:00

DATE TIME SEARCH

SEARCH START

05/01/05 00:00:01

ID EVENT DATE TIME

001 RECORD START 05/01/05 02:23:28

002 RECORD START 05/01/05 01:30:00

003 RECORD START 05/01/05 00:49:31

RECORD EVENT SEARCH

05/01/05 00:00:01

Summary of Contents for SMO-210DN











































































































































Search results

Summary of Contents for SMO-210DN

Reviews:

Brands by name

Popular brands

Samsung SMO-210DN, User Manual

Search results

Summary of Contents for SMO-210DN

Reviews:

Brands by name

Popular brands