Samsung SF-4300, User Manual

Page: 110 / 112

9. If you attach any equipment to your fax machine, it should not effect
how safe it is, and the standard it was approved for, EN 60950.
10. Although this equipment can use either DTMF or loop Disconnect
dialling, only the performance of the DTMF dialling is subject to
regulatory requirement for correct operation. It is therefore strongly
recommended that the equipment is set to use DTMF dialling for access
to public or private emergency services. DTMF also provides faster call
set up.
11. Control of fax from application software.
When writing application to drive the SmartJet, the requirements of DTI
designation 95/031S (NTR3) and ETS 300 001 (NET4) must be adhered
to. Failure to do so will result in the invalidation of Approval against the
standards for which approval has been granted.
12. If you are connected to a Private Branch Exchange, you normally have
to press a digit to get an outside line. This number is usually Ô9Õ. You
then dial as normal. If you need a pause, you should press it between
the Ô9Õ and the phone numbers. You can use the tone break recall facility
to transfer calls between phone extensions.
4 .10
Appendix
09-Appendix 2/5/99 9:33 AM Page 10