Samsung SCX-6545N Series Service Manual Download Page 259

Page: 259 / 392

Alignment & Troubleshooting

Service Manual

4-135

Samsung Electronics

Foreign matter stuck onto

the window of internal lenses of LSU mirror.

Clean the LSU window with recommended cleaner(IPA

) Clean the window with a clean

cotton swab.

Check where vertical white line is located.

Foreign matter or toner particles between the

magnetic roller and doctor

blade

Replace the drum cartridge and try again to print out.

It may occur when Burr and foreign substances are on the window of the drum cartridge frame.

Remove the foreign matter and burr of the exposure window. (the drum cartridge frame)

If the fuser is defective, voids occur periodically at the top of a black image.

Open the right cover and check ribs that corresponds to the position of the voids.

Remove if found.

If the problems are not solved, replace the drum cartridge.

YES

[ Descripition

]

White vertical voids in the image.

[

Wrong Part ]

1. LSU

2. Drum Cartridge

Vertical White Line

Summary of Contents for SCX-6545N Series









































































































































































































































































































































































































Search results

Summary of Contents for SCX-6545N Series

Reviews:

Related manuals for SCX-6545N Series

Brands by name

Popular brands

Samsung SCX-6545N Series, Service Manual

Search results

Summary of Contents for SCX-6545N Series

Reviews:

Related manuals for SCX-6545N Series

Brands by name

Popular brands