Samsung SCX-6545N Series Service Manual Download Page 224

Page: 224 / 392

Alignment & Troubleshooting

Service Manual

4-100

Samsung Electronics

Message

Description

Suggested solutions

Too much paper in output
bin tray. Remove printed
paper

The printed papers are full on the
output tray.

1. Remove the paper on outbin tray.
2. Check the Outbin Full Senosr (Component

Test -> Sensor Read -> OB value)

Top door of scanner is
open

1. DADF door is open during DADF

driving.

2. Platen Door is open during DADF

driving.

Close the DADF/Platen door

Top door of scanner is
open

DADF door is open

Close the DADF door.

Tray 4 door is open.
Close it

Tray4 door is open.

1. Open and close the door. If the message

is not disappeared, check the below steps.

2. Check that the door switch is pushed.
3. Check that the Ui message is chaged by

door switch action.

4. Check the door switch signal on EDC

mode.

Tray2 door is open. Close
it
or

Tray2(HCF) door is open.

Close it

Tray2 or Tray2 HCF door is open.

1. Open and close the door. If the message

is not disappeared, check the below steps.

2. Check that the door switch is pushed.
3. Check that the Ui message is chaged by

door switch action.

4. Check the door switch signal on EDC

mode.

Tray3 door is open. Close
it

Tray3 door is open.

1. Open and close the door. If the message

is not disappeared, check the below steps.

2. Check that the door switch is pushed.
3. Check that the Ui message is chaged by

door switch action.

4. Check the door switch signal on EDC

mode.

Summary of Contents for SCX-6545N Series









































































































































































































































































































































































































Search results

Summary of Contents for SCX-6545N Series

Reviews:

Brands by name

Popular brands

Samsung SCX-6545N Series, Service Manual

Search results

Summary of Contents for SCX-6545N Series

Reviews:

Brands by name

Popular brands