Samsung SCX-6545N Series Service Manual Download Page 241

Page: 241 / 392

Alignment & Troubleshooting

Service Manual

4-117

Samsung Electronics

4.2.2.12 General solution

Error

LCD NOT DISPLAY

[Description]

Engine is warming up properly but LCD does not display anything on.

[Wrong Part]

1. Main Controller
2. OPE
3. SMPS

[Check and Cause]

1. Check 24V on Main controller.
2. If 24V from Main controller is normal, Check the CCFL inverter harness on

OPE_Main.

3. If not, check the F 71 on SMPS.

[Solution]

1. 24V power and CCFL inverter harness connection are on normal, replace

OPE_Main first and retry.

2. Keep on problem with 24V on, replace the Main controller.
3. Replace the SMPS.

Error

LSU Error

[Description]

LSU sync Error displays on LCD

[Wrong Part]

1. Drum Cartridge
2. Main Controller
3. Cover Open Connector

[Check and Cause]

1. Check LSU 5V/24VS
2. Main Controller LSU Part defect
3. Micro Switch Harness

[Solution]

1. Replace Drum Cartridge and retry
2. Replace Main Controller.
3. Replace Micro Switch Assy

Error

Cover Open

[Description]

The cover open massage displays on even when the print cover is closed.

[Wrong Part]

1. Hook Lever in the side cover / Micro Switch

[Check and Cause]

1. The Hook Lever in the top cover may be defective.
2. Check the CN8-4 on Main B°ØD and the micro switch on the rear side of set.

[Solution]

1. Replace the hook lever, if defective.
2. Check Cover Open harness. Replace Cover Open S/W
3. Replace the Main Control board.

Summary of Contents for SCX-6545N Series









































































































































































































































































































































































































Search results

Summary of Contents for SCX-6545N Series

Reviews:

Related manuals for SCX-6545N Series

Brands by name

Popular brands

Samsung SCX-6545N Series, Service Manual

Search results

Summary of Contents for SCX-6545N Series

Reviews:

Related manuals for SCX-6545N Series

Brands by name

Popular brands