manualshive.com logo in svg

Samsung SCX-6545N Series, Service Manual

Share
Download
Samsung SCX-6545N Series Service Manual Download Page 169

Alignment & Troubleshooting

Service Manual

4-45

Samsung Electronics

Option 

Description

Tray Management

This feature allows you to select the tray and paper you use for a printing job. 

Paper size, paper type, and paper color options are adjusted here.
Tray Confirmation Message is to activate the window asking whether you set 

the paper size and type for the just opened tray.

•  Auto Tray Switch: If tray1 and tray2 are filled with letter size paper, when 

tray1 is empty and this option is On, then the machine continues printing with 

paper in tray2.

•  Auto Continue: When the paper is mismatched, meaning that tray1has 

filled with the letter size paper, but the printing job needs A4 size paper, the 

machine will wait for 30 seconds to paper in tray1 with proper sized paper. 

After 30 seconds, the machine automatically starts printing with Letter sized 

paper.

Altitude Adjustment

Print quality is affected by atmospheric pressure, which atmospheric pressure 

is determined by the height of the machine above sea level. This feature lets 
you adjust the altitude in a height district. Higher altitude location need to set 

this feature to High 3, which affects print quality.

Output Options

Output Options is for, when the staples run out, you to let the machine stop 
processing and wait to refill the staples or continue the job. If you set Within 
Job Offsetting to On, the output paper is placed and sorted by printout-sets.

Contention Management

This feature lets you to select the priority between copy jobs and print jobs.

•  Priority: Set the priority by numbering the job. The machine starts from the 

least to the highest number in order.

• First In, First Out: The machine does an asked job in order.

Sound

You can adjust the loudness of the machine sound. Press Fault to adjust the 

machine’s error sound. Select Conflict if you pressed the wrong option. Press 

Selection to sound whenever you press the selection from your touch screen.

Supplies Management

The machine gives you the notification of the drum and toner to reorder, and 
resets the used fuser counter, bias transfer roller, feed roller and document 

feeder friction pad counter.

Machine Test

The machine prints the test image patterns using Image Quality Test Patterns.

On Demand Overwrite

You can set the machine to delete previous job information on HDD as you 

store new job information. To activate this feature, go to Admin Setting > the 

Setup tab > Optional Service and set the On Demand Image Overwrite option 
to Enable. After activating this feature you can overwrite a HDD by pressing 
Start in the display.

Summary of Contents for SCX-6545N Series









































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands