Samsung SCX-6545N Series Service Manual Download Page 222

Page: 222 / 392

Alignment & Troubleshooting

Service Manual

4-98

Samsung Electronics

Message

Description

Suggested solutions

Paper Jam in tray3

Paper has jammed in the feeding
area of the tray.

1. Open the side door and Tray2/3 door and

remove the jammed paper.

2. If there is not jammed paper but the error

message is occured, check the Feed

sensor or Hardware.

3. If the paper is feeding by rotating the

pick up roller, check the clutch and clutch

signal.

Paper Jam in tray3

Paper has jammed in the feeding
area of the tray.

1. Open the side door and Tray2/3 door and

remove the jammed paper.

2. If there is not jammed paper but the error

message is occured, check the Feed

sensor or Hardware.

3. If the paper is feeding by rotating the

pick up roller, check the clutch and clutch

signal.

Paper Jam in tray3(HCF)

Paper has jammed in the feeding
area of the tray.

1. If pick up roller does not rotate , check the

pick up clutch.

2. If Pickup roller is rotating but the paper is

not feeding, replace the pick up rubber.

3. Check the feed sensor. If it is defective,

replace it.

Paper Jam in tray4

1. Open the side door and Tray2/3/4 door

and remove the jammed paper.

2. If there is not jammed paper but the error

message is occured, check the Feed

sensor or Hardware.

3. If the paper is feeding by rotating the

pick up roller, check the clutch and clutch

signal.

Paper Jam inside of
duplex path

Paper has jammed during duplex
printing.

1. Open the side door and remove the

jammed paper.

2. If there is not jammed paper but the error

message is occurred, check the duplex

sensor. (Component Test)

Paper Jam inside of
machine

Paper has jammed in the registration
area

1. Open the Side door and remove the

jammed paper.

2. If there is not jammed paper but the error

is occured, Check the Registration Sensor

(Component Test -> Sensor Read -> RG
value)

3. If the paper stopped after actuating

the Exit sensor, Check the Exit sensor

(Component Test -> Sensor Read -> EX
value)

Summary of Contents for SCX-6545N Series









































































































































































































































































































































































































Search results

Summary of Contents for SCX-6545N Series

Reviews:

Related manuals for SCX-6545N Series

Brands by name

Popular brands

Samsung SCX-6545N Series, Service Manual

Search results

Summary of Contents for SCX-6545N Series

Reviews:

Related manuals for SCX-6545N Series

Brands by name

Popular brands