manualshive.com logo in svg

Samsung SCX-6545N Series, Service Manual

Share
Download
Samsung SCX-6545N Series Service Manual Download Page 130

Alignment & Troubleshooting

Service Manual

4-6

Samsung Electronics

4.1.2.2 Clearing paper jams

When a paper jam occurs, the warming message appears on the display screen. Refer to the table below to 

locate and clear the paper jam.

Message 

Location of jam 

Feed Jam at Tray 1,
Feed Jam at Tray 2,
Feed Jam at Tray 3,
Feed Jam at Tray 4,
Feed Jam at MP Tray

In the paper feed area (tray 1, optional tray, or multi-purpose tray)

Check Tray 2 Feed Area,
Check Tray 3 Feed Area,
Check Tray 4 Feed Area

In the paper feed area (optional tray)

Jam at Fuser

In the fuser area or around the toner cartridge

Registration Jam

In the paper exit area

Duplex Jam 0,

Duplex Jam 1,

Duplex Jam 2

In the duplex unit

Finisher Jam 0

 In the stacker unit

Finisher Jam 1, 

Finisher Duplex Jam

 In the stacker unit

Finisher Jam 2

 In the stacker unit

In the tray 1

1.  Pull out the paper tray to open. After you pull it 

out completely, lift the front part of the tray up 

slightly to release the tray from the machine.

2.  Remove the jammed paper by gently pulling it 

straight out. 

Once you remove the jammed paper here, open 

the side cover and then close it to clear the error 

message on the display.

If there is any resistance, and the paper does not 

move immediately when you pull, stop pulling. 

Then:

Summary of Contents for SCX-6545N Series









































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands