Samsung SCX-6545N Series Service Manual Download Page 184

Page: 184 / 392

Alignment & Troubleshooting

Service Manual

4-60

Samsung Electronics

• User Behavior

- User can select one item in the list to reset the counter using “Reset” button or to edit the Max.Life and

threshold value using “Edit” button.

• Items in this column are:

DADF Roller / Rubber Pad Life Page

T1/T2/T3 P-up Roller Life Page

Retard Roller Life Page

Bypass Rubber Pad Life page

Transfer Roller Life Page

Fuser Roller / Fuser Unit Life Page

Heat Roller Life Page

Pressure Roller Life Page

• Status

- The possible values in this column are ‘OK’, ‘Check’, ‘Negative’ and ‘Off’.

- OK : Actual counter is smaller than the threshold value

- Check : Actual counter is bigger than threshold value but smaller than Max.Life

- Off : Actual counter exceeds Max.Life

- Negative : There is no counter to display. In this case, it shall display ‘-‘ in the

Status and Max Life column.

• Actual

- Values in this column are actual counts for HFSI usage

• Max. Life

Values in this column are maximum life limits set for HFSI.

• Reset

This button is used to reset the actual counter after replacing the HFSI unit.

This button is disabled before user select one item in the list and enabled once user select any of the items

in the list.

Once user presses, a confirmation window shall display to user confirm again. The window is displayed as

below.

If user confirms reset, it will reset the counter to 0.

If the counter of selected item is 0, ‘Reset’ button shall be disabled.

Summary of Contents for SCX-6545N Series









































































































































































































































































































































































































Search results

Summary of Contents for SCX-6545N Series

Reviews:

Related manuals for SCX-6545N Series

Brands by name

Popular brands

Samsung SCX-6545N Series, Service Manual

Search results

Summary of Contents for SCX-6545N Series

Reviews:

Related manuals for SCX-6545N Series

Brands by name

Popular brands