Samsung SCX 5115 - B/W Laser - All-in-One Page 93 User Manual Download

Page: 93 / 144

AINTENANCE

Cleaning the Scan Unit

Keeping the scan unit clean helps ensure the best possible
copies. We suggests that you clean the scan unit at the start of
each day and during the day as needed.

AUTIONS

Cleaning the cabinet of the printer with surfactants

containing large amounts of alcohol, solvent or other strong
substances can discolor or crack the cabinet.

OTE

Clean the cabinet of the printer with a soft, lint-free cloth.

You can dampen the cloth slightly with water, but be careful not to
be let any water drip onto the printer or inside of it.

Slightly dampen a soft lint-free cloth or paper towel with
water.

Open the document cover.

Wipe the surface of the document glass

and ADF glass

until

it is clean and dry.

Wipe the underside of the white document cover and white
sheet until it is clean and dry.

Close the document cover.

Document cover

Document

White sheet

ADF glass

Summary of Contents for SCX 5115 - B/W Laser - All-in-One

















































































































































Search results

Summary of Contents for SCX 5115 - B/W Laser - All-in-One

Reviews:

Related manuals for SCX 5115 - B/W Laser - All-in-One

Brands by name

Popular brands

Samsung SCX 5115 - B/W Laser - All-in-One, User Manual

Search results

Summary of Contents for SCX 5115 - B/W Laser - All-in-One

Reviews:

Related manuals for SCX 5115 - B/W Laser - All-in-One

Brands by name

Popular brands