G
ETTING
STARTED
1
.
22
Power Save
The Power Save mode allows the printer to reduce power
consumption when it is not in actual use. To turn the Power Save
mode on, take the following steps:
1
Press
SAVE Power
. The display shows the current setting
on the bottom line.
2
Press
SAVE Power
or use the navigation buttons to change
the setting. To enable the Power Save mode, select “ON.” Or
select “OFF” to disable the mode.
3
Press
Mode/Enter
(
Enter
for SCX-5115) to save the
selection.
You can further select the length of time the machine waits after
a job is printed before it switches to a reduced power state.
1
Press
Menu/Exit
and then
System Data
from the one-
touch dial keypad. SCX-5115 users should press
Menu
and
then
Enter
.
2
Press
or
until “POWER SAVE” appears on the display.
Make sure that “ON” blinks on the bottom line.
If necessary, use or to select “ON” and press
Mode/
Enter
(
Enter
for SCX-5115).
3
The available time settings appear on the display and the
current setting blinks. The available options are 5, 10, 15,
30, and 45 (minutes). Press or until the desired time
blinks.
4
Press
Mode/Enter
(
Enter
for SCX-5115) to save the
selection.
5
To return to Standby mode, press
Stop/Clear
.
Summary of Contents for SCX 5115 - B/W Laser - All-in-One
Page 59: ...PAPER HANDLING 3 10 NOTE ...
Page 73: ...COPYING 4 14 MEMO ...
Page 103: ...MAINTENANCE 7 12 MEMO ...
Page 123: ...TROUBLESHOOTING 8 20 NOTE ...
