Samsung SCX-4720FN User Manual Download Page 86

Page: 86 / 302

APER

ANDLING

3.11

Printing to the Rear Output Slot

(Face up)

Using the rear output slot, paper comes out of the machine

face up.

Printing from the Multipurpose tray to the rear output slot

provides a

straight paper path

. Using the rear output slot

might improve the output quality with the following:
• envelopes
• labels
• small custom-sized paper
• postcards
• transparencies

To use the rear output slot:

Open the rear door by pulling it upward.

AUTION

The fuser area inside the rear door of your machine

becomes very hot when in use. Take care not to burn your fingers

when you access this area.

Summary of Contents for SCX-4720FN















































































































































































































































































































Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands

Samsung SCX-4720FN, User Manual

Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands