Samsung SCX-4720FN User Manual Download Page 190

Page: 190 / 302

AINTENANCE

8.5

Cleaning the Scan Unit

Keeping the scan unit clean helps ensure the best possible

copies. We suggest that you clean the scan unit at the start of

each day and during the day, as needed.

Slightly dampen a soft lint-free cloth or paper towel with
water.

Open the document cover.

Wipe the surface of the document glass and ADF glass until
it is clean and dry.

Wipe the underside of the white document cover and white
sheet until it is clean and dry.

Close the document cover.

Document cover

Document glass

White sheet

ADF glass

Summary of Contents for SCX-4720FN















































































































































































































































































































Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands

Samsung SCX-4720FN, User Manual

Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands