Samsung SCX-4720FN User Manual Download Page 249

Page: 249 / 302

SING

USB F

LASH

RIVE

10.12

To restore the data:

Insert the USB flash drive. For details, see page 10.2.

Press

Menu

until “Machine Setup” appears on the top line

of the display.

Press the scroll button ( or ) until you see “Import
Setting” on the bottom line and press

Enter

Select the data type you want to restore, either
“Phonebook” or “All Settings” and press

Enter

Select the file you want to restore and press

Enter

The first available menu item, “Yes,” appears on the bottom

line.

Press

Enter

to restore the backup file to the machine.

To return to Standby mode, press

Stop/Clear

Summary of Contents for SCX-4720FN















































































































































































































































































































Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands

Samsung SCX-4720FN, User Manual

Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands