Samsung SCX-4720FN User Manual Download Page 220

Page: 220 / 302

ROUBLESHOOTING

9.15

Scanner Locked

The scanner module is

locked

Unlock the scanner (see page 2.3)

and press

Stop/Clear

[Stop Pressed]

The

Stop/Clear

button

has been pressed during

a copy or fax operation.

Try again.

Toner Empty

[Toner Empty]

Replace Toner

The toner cartridge has

run out. The machine

stops printing.

Replace the toner cartridge with a

new one. See page 8.8.

[Toner Low]

The toner is almost

empty.

Take out the toner cartridge and

gently shake it. By doing this, you

can temporarily reestablish

printing operations.

Display

Meaning

Suggested solutions

Summary of Contents for SCX-4720FN















































































































































































































































































































Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands

Samsung SCX-4720FN, User Manual

Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands