Samsung SCX-4720FN User Manual Download Page 41

Page: 41 / 302

ETTING

TARTED

2.14

Turning the Machine On

Plug one end of the supplied three-pronged electrical cord
into the AC socket on the machine and the other end into a

properly grounded AC outlet.

Press the power switch to turn the machine on. “Warming
Up Please Wait” appears on the display indicating that the

machine is now on.

To view your display text in another language, see

page 2.15.

AUTIONS

• The fuser area inside of the rear door of your machine becomes

very hot when in use. Take care not to burn your fingers when

you access this area.

• Do not disassemble the machine with power on. If you do, you

may receive an electric shock.

To the AC wall jack

Summary of Contents for SCX-4720FN















































































































































































































































































































Search results

Summary of Contents for SCX-4720FN

Reviews:

Brands by name

Popular brands

Samsung SCX-4720FN, User Manual

Search results

Summary of Contents for SCX-4720FN

Reviews:

Brands by name

Popular brands