Samsung SCX-4720FN User Manual Download Page 211

Page: 211 / 302

ROUBLESHOOTING

9.6

Remove the jammed paper by gently pulling it straight out.

If there is any resistance and the paper does not move

when you pull, or if you cannot see the paper in this area,

check the fuser area around the toner cartridge. See

page 9.7.

Insert the paper tray into the machine until it snaps into
place.

Open and close the front door to resume printing.

In Optional Tray 2

Pull the optional Tray 2 open.

Remove the jammed paper from the machine.

If there is any resistance and the paper does not move

when you pull, or if you cannot see the paper in this area,

go to step 3.

Pull the standard Tray 1 open.

Summary of Contents for SCX-4720FN















































































































































































































































































































Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands

Samsung SCX-4720FN, User Manual

Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands