Samsung SCX-4720FN User Manual Download Page 32

Page: 32 / 302

ETTING

TARTED

2.5

Installing the Toner Cartridge

Open the front door.

Remove the starter toner cartridge from its bag. Gently roll
the cartridge 5 or 6 times to distribute the toner.

Thoroughly rolling the cartridge will assure maximum

copies per cartridge.

OTE

If toner gets on your clothing, wipe it off with a dry cloth

and wash clothing in cold water. Hot water sets toner into fabric.

AUTIONS

• To prevent damage, do not expose the toner cartridge to light for

more than a few minutes. Cover it with a piece of paper, if left

exposed for more than a few minutes.

• Do not touch the green underside of the toner cartridge. Use the

handle on the cartridge to avoid touching this area.

Summary of Contents for SCX-4720FN















































































































































































































































































































Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands

Samsung SCX-4720FN, User Manual

Search results

Summary of Contents for SCX-4720FN

Reviews:

Related manuals for SCX-4720FN

Brands by name

Popular brands