Samsung SCX-4701ND Service Manual Download

Page: 20 / 127

2. Product specification and description

2.2. System Overview

This chapter describes the functions and operating principal of the main component.

2.2.1. Front View

NOTE

•

This illustration may differ from your machine depending on its model.

•

Some features and optional goods may not be available depending on model or country.

Document feeder cover

Document feeder guide cover

Document feeder output tray

Control Panel

Paper level indicator

Tray

Manual feeder tray

Front cover

Output tray

Output support

Paper width guide on a manual feeder tray

Scanner lid

Scanner glass

Document feeder input tray

Paper width guide on a Document feeder

Document feeder output support

Handset (SCX-4729HD, 4728HN only)

2-11

Summary of Contents for SCX-4701ND






























































































































Search results

Summary of Contents for SCX-4701ND

Reviews:

Related manuals for SCX-4701ND

Brands by name

Popular brands

Samsung SCX-4701ND, Service Manual

Search results

Summary of Contents for SCX-4701ND

Reviews:

Related manuals for SCX-4701ND

Brands by name

Popular brands