CHAPTER 3. OfficeServ 7400 Specifications
3-2
© Samsung Business Communications
Table 3.1 OfficeServ 7400 Capacity (Continued)
System Configuration
Maximum Line Capacity
Basic c Expansion
chassis 1
When using E1: 930
When using 8TRK: 168
When using DLI/SLI: 336
When using the maximum capacity: 672 (voice)
When using the LAN switch: 352
When using the internal power of PLIM: 64
When using VDSL: 40
When using the WLAN terminal or IP phone: 992
MFM: 4 per system
RCM2: Up to 4 per system (R2 = 8 ports or CID = 14)
(R2 = 4/CID = 6 when both station and trunk lines are
supported.)
CRM: Up to 4 per system (MFM (20), R2 (16), or CID (16))
Basic c Expansion
chassis 1 + Expansion chas-
sis 2
When using E1: 1260
When using 8TRK: 256
When using DLI/SLI: 512
When using the maximum capacity: 1024 (voice)
When using the LAN switch: 528
When using the internal power of PLIM: 96
When using VDSL: 60
When using the WLAN terminal or IP phone: 1344
MFM: 6 per system
RCM2: Up to 6 per system (R2 = 8 ports or CID = 14)
(R2 = 4/CID = 6 when both station and trunk lines are
supported.)
CRM: Up to 6 per system (MFM (20), R2 (16), or CID (16))
3.1.1 Trunk Line Capacity
The maximum trunk line capacity of the OfficeServ 7400 based on its configuration is
shown in the table below:
Table 3.2 Trunk Line Capacity
Analogue
Digital
System Configuration
LOOP TRK
T1 TRK
E1 TRK
PRI TRK
Basic chassis
80
480
600
T1: 480
E1: 600
Basic c Expansion
chassis 1
168
744
930
T1: 744
E1: 930
Basic c Expansion
chassis 1 + Expansion chas-
sis 2
256 1008 1260
T1:
1008
E1: 1260
