background image

CHAPTER 2. OfficeServ 7400 Hardware 

2-30

 

© Samsung Business Communications 

2.3.5  Voice Application Module 

This section describes the interface module using Digital Adaptor for Subscriber Loop 
(DASL) to send/receive voice to/from the phone system and wireless base station. It con-
verts voice to data and sends/receives the data. 
 

2.3.5.1 MGI

 

The Media Gateway Interface (MGI) module converts voice to data and sends/receives the 
data via the data network. The MGI offers up to 16 channels and decompresses voice using 
G.729, G.723, G.726, and G.711. 
 

Main Functions 

The main functions of the MGI voice application module are as follows: 

y

 

Voice decompression: G.729, G.723, G.726, G.711 

y

 

Facsimile relay: Provides two facsimile channels and four voice channels per module 
(two channels per module) 

y

 

Echo cancellation   

y

 

Volume adjustment (-30~+30 dBm) 

y

 

Silence suppression 

 

MGI2D Optional Module

 

The MGI2D option module can be mounted on the MGI module to convert voice into 
packets. Up to four MGI2D modules can be mounted. An MGI2D module processes four 
channels, so the MGI module can process up to 16 channels of voice signals. 
 

Front Panel 

The front panel of the MGI voice application module is shown below: 
 

Figure 2.18    Front Panel of MGI Module 

 

RST 

MGI 

LAN 

SIO 

PWR RUN 

LAN 

TX 

SVC 

LAN 

Rx 

DSP RTPT  RTPR 

Summary of Contents for OfficeServ 7400

















































































































Reviews: